[Elecraft] P3 - Center/Top Spectrum Frequency Stays Zero?

[Charles Johnson]

Same exact issue here. The P3 screen also became slow to refresh, like once every 5 seconds. Turn K3 and P3 off/on solved the issue. This only happened after a screen capture.

Charles, K4ZRJ


> On Jul 28, 2016, at 8:02 AM, w4sc <w4sc at windstream.net> wrote:
> 
> I had this issue also.  The “0” reading appeared after making and saving a couple of screen captures.  Recycling the power on the P3 did not correct.  Closing the “COMM PORT” and reopening did correct it.  I have had other issues with this connection to the P3 through the K3S USB connection.
> 
> Ben W4SC
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k4zrj at icloud.com