[Elecraft] Power has disappeared

[Richard Fjeld]

I don't think you stated, so I will ask;
Did you check the circuit breaker in back?

Dick, n0ce


On 7/26/2016 7:48 PM, Chris Kimball wrote:
> I'm a new owner and all worked fine.  After an absence of a few days I came
> back to no power out, or , at least, very little.
>
> Rig is the 100W version with ATU working into a dummy load.  In CW mode
> adjusting the power level to 70W produces only a one segment power out.
> Running the ATU produces a 5W indication, the usual searching rumbling, but
> no resultant SWR. The Test mode is NOT in operation.
>
> I have restored to the last working config via K3 Utility, but suspect I
> must have "hit" something to limit the power.  The FP and AMP temps were too
> high (35C) when the problem was noticed. I set them down to a more
> reasonable 23C without effect. Input voltage is 12.8V.
>
> Probably something trivial, but suggestions would be appreciated.
>
> Chris
> NQ8Z
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/Power-has-disappeared-tp7620735.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rpfjeld at outlook.com