[Elecraft] JT65 with a K3 & MicroHam digikeyer II

[Jim Brown]

On Tue,7/26/2016 11:47 AM, Joe Subich, W4TV wrote:
> Which JT65 application?  The easiest way to start is to use WSJT 10
> - the example configuration is in microHAM Router (Help | Download
> Documents) or on the web site at www.microHAM-USA.com/support.html.
>

> You can also use several of the other JT65 HF packages if you disable
> CAT (radio frequency interface) and us only serial port PTT on the
> 2nd PTT port in microHAM Router.

I can't comment on the microHam aspects of JT65 operation, in which Joe 
is the best to advise you.

But using nothing more than an Elecraft USB cable and a Tascam US100 
audio interface, I find WSJT-X to be MUCH simpler and easier to use than 
WSJT 10. I use VOX for T/R switching. Before WSJT-X was introduced, I 
was quite happy with WSJT-HF by W6CQZ.  I use WSJT 10 only for those 
modes that WSJT-X does not support, like FSK441 and ISCAT.

73, Jim K9YC