[Elecraft] [K3S] Test Procedure

[Clay Autery]

Glad that's all that was toasted, Jerry!

Did I miss where the "complete test procedure" was posted?  That's a
diag tree I'd like ot have.

73,

______________________
Clay Autery, KY5G
MONTAC Enterprises
(318) 518-1389

On 7/24/2016 2:39 PM, Jerry Moore wrote:
> Further testing has proven to be interesting.
> Final assessment. 
> 1 USB hub damaged
>
> All other gear is fully functional. It's more likely that the hub failed at
> an earlier date and was only discovered on me testing post storm. This is
> the most logical as everything has been disconnected for weeks due to
> inactivity.
> Jer
>
> -----Original Message-----
> From: Jerry Moore [mailto:jermo at carolinaheli.com] 
> Sent: Friday, July 22, 2016 1:34 PM
> To: 'Elecraft at mailman.qth.net'
> Subject: [K3S] Test Procedure
>
>
>
> Does anyone have a full functional test procedure to verify my K3S is fully
> operational?
>
> I had a local lightning strike came in through ground that apparently
> damaged a USB hub, Raspberry PI, Keyboard, Mouse... I suspect the K3s may be
> damaged as well (especially the USB).
> I'm looking for a full test process so I can find all of the damage first
> time around rather than hunt/peck.
>
> The K3S powers and appears to rx/tx,
> Thanks in advance
> Jerry Moore, AE4PB
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to cautery at montac.com