[Elecraft] [K3] internal 144MHz xvrtr - no output

[Ron D'Eau Claire]

How about other modes (CW or SSB)? Do they work on 2M, if so it's a crystal
filter configuration issue. Easy to check: see if you can transmit FM on
another band such as 10 or 6 meters.

If it's dead in all modes, or especially if it is intermittent, check to be
sure the antenna cable is properly inserted in the TMP connector at the
K144XV module.

73, Ron AC7AC

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of mike
Sent: Sunday, July 24, 2016 6:26 AM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] [K3] internal 144MHz xvrtr - no output

Apparently it is an intermittent problem. Originally receive seemed to work
fine, but not now. And then just now I was able to pick up a transmission
from the K3 on my handheld, working just as it was supposed to. But then it
didn't work anymore. 

I will need move the K3 to my bench (I do hate unplugging all the cables in
back!), pop the top on the K3 and run through the diagnostics on the xvrtr.
73  ..mike  AI6II



--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-internal-144NHz-xvrtr-no-output-tp76
20622p7620623.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to ron at elecraft.com