[Elecraft] How difficult is it to install the FM filter ofr K3 with ...

[Don Wilhelm]

Mike,

You technically don't have to move the filters in the KRX3, but it just 
makes more sense to me to have them match.

Yes, if you do not have the K144XV in your K3, then there is no real 
sense in installing the 13kHz filter (unless you want to do AM transmit 
with that filter).

73,
Don W3FPR

On 7/20/2016 9:59 PM, mike wrote:
> Okay Don, just ti make sure I understand about the filters. I currently have
> three matched filters in both the main and subreceiver. I would insert the
> FM filter in FL1 of the main and slide the other three down. Then I would
> need to leave the FL1 blank on the subreceiver and slide the three existing
> ones down as I did in the main receiver, right? I then would need to
> reconfigure the FW definitions for all the filters.
>
> Actually I don't really use the 2 meter module at all at my qth. I do have a
> second K3 that I have up for sale, so maybe I will install the 2 meter
> module and the FM filter in it instead. It doesn't have a second receiver so
> the installation would be much easier.  Hmmmmm.
>
>