[Elecraft] How difficult is it to install the FM filter ofr K3 with ...

[Don Wilhelm]

Mike,

Not a big problem, but you do have some mechanical work to do.

Remove the 2 meter option and the KRX3.
That will expose the filters for the main receiver.
The 13kHz filter should go into the FL1 slot - that means you may have 
to move and reconfigure all the other filters installed in your K3.

Other than having to remove the K144XV and the KRX3 options to 
physically get at the main RX filters, you should have no problem when 
you re-install the KRX3 and the K144XV.

Keeping your mind straight about which filters are plugged into which 
slots and transferring that information into the CONFIG menu is the 
hardest part of the chore.

73,
Don W3FPR

On 7/19/2016 3:50 PM, mike wrote:
> I have a K3 with the 2 meter module and second receiver installed. I recently
> acquired a FM filter and am wondering how difficult it would be to install
> it. Mostly I guess I am looking for an idea on what steps I need to perform
> and in what order. I installed the second receiver some time ago after
> installing the 2 meter module and remember it was quite involved. Before I
> attempt to add the FM filter I want to make sure I am up to the challenge.
> Any suggestions would be greatly appreciated.  73  ..mike  AI6II
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/How-difficult-is-it-to-install-the-FM-filter-ofr-K3-with-tp7620404.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to donwilh at embarqmail.com
>