[Elecraft] K3 error message

[Don Wilhelm]

Mike,

Since you moved the filters in the KRX3, you may want to go into the 
CONFIG menu and tell it which filters for the KRX3 are installed and in 
which slots.

73,
Do W3FPR

On 7/19/2016 8:06 PM, Mike Murray wrote:
> After removing one filter from my subRx and moving the remaining filter
> (2.8) to position #1, I'm now getting and ERR BP3 on start up.  Before I
> open everything up again and remove the KRX3, SUBIN and SUBOUT boards and
> reset everything as detailed in the manual, is there anything else I should
> be doing to troubleshoot?  It's obviously a problem with the SubRx, but I
> thought I was being ultra cautious during the disassembly/assembly process,
> including use of static protection precautions.
>
>