[Elecraft] K2 automatic tuner

[Don Wilhelm]

William,

Are you reading the K2 display correctly when you do a TUNE?
Normally the K2 displays the power on the left and the SWR on the right.
The power is normally 20 watts and the SWR will be shown as 2 digits 
(1.0 through 9.9).
In other words, you will see something like "20  1.0".

If the KPA100 wattmeter is not indicating properly, it may be that 
diodes D16 and D17 have become damaged, or it may just be that the 
wattmeter needs to be balanced and calibrated.

73,
Don W3FPR

On 7/20/2016 12:33 PM, William at zendamateur.nl wrote:
> Hi group,
>
> Perhaps it's a silly question, but i don't understand something.
>
>   I have a K2 100 watt but I don't think any other set will make a deferens.
> the set is connected to a tuner (AT-100Pro LDG) and it tunes as far as I can
> see ok.
>
> But now what I notice, when I tune the tuner tunes to swr 1.1 so that seems
> to be ok, but my K2 gives me 2.0    1.
>
> Does that mean my K2 sees a swr from2.0 whil my tuner says  it is 1.0 ??
>