[Elecraft] deoxit

[Ron D'Eau Claire]

I have only used deoxit because the little bottle I bought a decade ago is
not nearly exhausted. It works great and contacts cleaned with it have
continued to work for years afterward, even aboard ships where they are
exposed to salty air (but not salt water). 

However other formulations or brands may work better. 

73, Ron AC7AC

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Rich
Assarabowski
Sent: Monday, July 18, 2016 8:50 PM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] deoxit

What's the consensus on the best stuff to use on all contacts and
connections during assembly of a new K3?   Caig DeoxIT Gold G-series
(formerly ProGold)?   Stabilant 22A?   Something else?

--- Rich K1CC

>I cleaned the connector and I put few drops of Stabilant 22A and the
problem
>seems resolved. My friend VE2OLM have a PCB design and assembly shop. 
>He need sometime to rework some boards and he need use that stuff to 
>correct the problem. Also use by NATO
>
>http://stabilant.com/appnt01.php

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to ron at elecraft.com