[Elecraft] monitoring your own transmitted RTTY text

[Joe Subich, W4TV]

Is "Sound Loopback" set to "Int" on the MMTTY Config | Misc tab *and*
TX Port set to "Sound + COM-TxD (FSK)?  That should allow MMTTY to
monitor transmission regardless of the transceiver in use.

I'm not sure that all versions of the K3/K3S firmware echo "Monitor"
to the Line Out.  Is Monitor enabled (Mon level = 8 to 10 at least)
on the "newie's" K3?

73,

    ... Joe, W4TV


On 7/16/2016 9:08 PM, Jamie WW3S wrote:
> Trying to help a RTTY newbie setup his Microkeyer II to his K3, we had everything working in NAQP except whatever he sent was not visible in the digi window of MM+. We noticed it scrolled by in the microkeyer window, but a nusiance to try to keep your eyes on the screen and the keyer......I noticed a post about the recent K3 firmware, but Ed doesn’t have that installed in his K3.....is there a setting or something we missed? With my microkeyer, I didn’t have to do anything, what I sent was automagically captured in the digi window.....
>
> 73, Jamie WW3S
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com
>