[Elecraft] [Kx3] [Kx2] Text decode threshold levels

[Nr4c]

My experience with Elecraft text decode is:

🚨 turn on cwt
🚨 tune station carefully, SPOT is your friend here
🚨 set threshold to 2 or 3 and be sure that the bar is flashing in step with the code, adjust threshold until it does. 
🚨 if can get above set threshold one higher and reduce RF Gain 

Sent from my iPhone
...nr4c. bill


> On Jul 17, 2016, at 5:25 PM, Hajo Dezelski <dl1sdz at gmail.com> wrote:
> 
> Hello,
> 
> comparing these two rigs in the mode "text decode" I had the
> impression that the Kx3 did a better job. But this could be triggered
> by different settings.
> 
> Is the software implementation of the thresholds 1-6 when adjusting in
> both rigs identical or do they differ?
> 
> If they differ what would be comparable settings?
> 
> 73 de
> Hajo dl1sdz
> 
> ---
> Cela est bien dit, mais il faut cultiver notre jardin.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com