[Elecraft] Did calibration

[Dick Lindzen]

Thanks.

-----Original Message-----
From: Mark E. Musick [mailto:markmusick at sbcglobal.net] 
Sent: Sunday, July 17, 2016 5:58 AM
To: Dick Lindzen; 'Reflector Elecraft'
Subject: RE: [Elecraft] Did calibration

With the firmware upgrade the VFO linking was moved from the sub receiver button to the config menu.
Look in the firmware upgrade notes. There you will find the information you need to link the VFOs.

Mark Musick, WB9CIF

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Dick Lindzen
Sent: Sunday, July 17, 2016 5:19 AM
To: Reflector Elecraft <elecraft at mailman.qth.net>
Subject: [Elecraft] Did calibration

The power issue was solved with a calibration.  Any suggestions for the inability in link vfo's?
73, Dick, WO1I K3 911
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to markmusick at sbcglobal.net