[Elecraft] [KPOD] Re: Now that the K-Pod is shipping, (longer RJ12 cable)

[Lyle Johnson]

It is a 6-pin connector and the wire at pin 1 should be cut at the radio 
end and to be safe cut it at both ends.

Yes, people will use full 6-pin cables and may not observe any 
problems.  Regardless of such anecdotal evidencee, cut the wire to pin 1.

And of course, turn off the radio before you plug or unplug the cable at 
the radio end .  No, you won't damage the radio if you don't observe 
this.. Yes, you may be surprised if you don't observe this.

You can see the schematic of the K3 to see what things are connected to, 
and pencil in the mod to see what changes.

73,

Lyle KK7P

> Can someone send me the RJ-45 pinout for the connection to the K-pod
> (with and without the power mod)?
>> So far, I'm experiencing normal operation of the K-Pod with a 14ft RJ12
>> 6C straight through cable.
>>> is there a reason that an rj12 6c straight thru would not work,???