[Elecraft] Winlink & K3 settings

[w4grj]

Tony,

I use to have a K3, still enjoy this list.

I run a P3 SCS modem on winlink .... I think the issue now could be band
conditions.

They are pretty bad http://www.bandconditions.com/ also, the propagation
channel selection

in Winlink Express is showing the same here in Florida.

 

Good Luck,

Jack

W4GRJ/AFA4DG

 

 

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Tony
Lyon
Sent: Friday, July 15, 2016 9:58 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] Winlink & K3 settings

 

Folks,

I recently set up an SCS DR-7400 with my K3 on Winlink.

I must have some settings that

are slightly off, since my link

up capabilities (HF) are not

as reliable as I expected.

 

So, I would appreciate feedback

from Winlink users who are actively using their K3.

 

Here is what I am interested in:

TNC setup values in Winlink (RMS Express)

 

K3 settings used.

 

73,

Tony Lyon (KJ5XF)

______________________________________________________________

Elecraft mailing list

Home:  <http://mailman.qth.net/mailman/listinfo/elecraft>
http://mailman.qth.net/mailman/listinfo/elecraft

Help:  <http://mailman.qth.net/mmfaq.htm> http://mailman.qth.net/mmfaq.htm

Post:  <mailto:Elecraft at mailman.qth.net> mailto:Elecraft at mailman.qth.net

 

This list hosted by:  <http://www.qsl.net> http://www.qsl.net

Please help support this email list:  <http://www.qsl.net/donate.html>
http://www.qsl.net/donate.html Message delivered to
<mailto:w4grj at satterfield.org> w4grj at satterfield.org