[Elecraft] Win4K3 and the mouse wheel

[tomb18]

HiFirst thing I would do is check your firmware on your radio as well as all peripherals like a p3 etc.  If you have old firmware there's likely to be a delay. Second make sure that you have the radio set to show all digits of the frequency down to hz. The mouse wheel should work instantaneously and be quite fast.73 Tom 



Sent from my Samsung Galaxy smartphone.
-------- Original message --------From: Michael Dinkelman via Elecraft <elecraft at mailman.qth.net> Date: 2016-07-13  6:33 PM  (GMT-05:00) To: Elecraft Reflector <elecraft at mailman.qth.net> Subject: [Elecraft] Win4K3 and the mouse wheel 
I know this is the Elecraft reflector but it seems to be a de-facto Win4K3  site as well.Been trying out the Win4K3 demo (which I heard about here).  My mouse/trackball 
pointer wheels don't seem to have much effect. If I spin them really fast, sometimes 
something moves a bit. 

This effect is the same in the spectrum window (incremental tuning)  or the control 
window (changing a frequency number). Yes I know the steps in the spectrum window can be changed. If I change it to bigger steps, the excessive spinning of the mouse 
wheel is still required, it just jumps further when the program finally recognizes  the 
wheel moved. Anybody else seen something similar? I use a trackball but an 
ol'  fashioned mouse acts the same.
cheersdink, n7wa




______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tomb18 at videotron.ca