[Elecraft] KAT500 question

[Dick Dievendorff]

Not thru, but if you control a power supply from the K3, that will do it. I bought but haven't yet installed a West Mountain Rig Runner model 4020S+ that switches power to other outlets when one "master" device is switched on. 

Or use the K3 back panel RCA 12V connector to activate a relay that provides power to other station devices.

The KAT500 can at times draw a bit more than the 500 ma or 1A provided by the K3 12V RCA connector. 

73 de Dick, K6KR

Sent from my iPhone

> On Jul 13, 2016, at 14:10, Jerry <W1ie at jetbroadband.com> wrote:
> 
> Greetings all,
> 
> 
> 
> Is it possible to be able to power  on and off the KAT500 through the K3?
> 
> 
> 
> Best regards,
> 
> 
> 
> Jerry, W1IE
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dick at elecraft.com