[Elecraft] KAT500 question

[Rick WA6NHC]

But you can via the utility, if that can apply to your needs.


Rick nhc


On 7/13/2016 2:28 PM, John E Bastin wrote:
> On Jul 13, 2016, at 17:10, Jerry <W1ie at jetbroadband.com> wrote:
>> Greetings all,
>>
>>
>>
>> Is it possible to be able to power  on and off the KAT500 through the K3?
> Short answer: No.
>
>  From the KAT500 manual:
>
> "Connect to the station 11 to 15 VDC power supply with the white striped lead to the positive terminal. Do not take this power from the K3’s 12 VDC output connector, even if it has been upgraded for 1 Ampere.”
>
> Hope this helps,
>
> 73,
>
> John K8AJS
> jbastin at sssnet.com
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wa6nhc at gmail.com