[Elecraft] P3 with K2?

[Tom Azlin W7SUA]

How about this one?

https://sage-shop.com/epages/qrp-shop.sf/en_GB/?ObjectPath=/Shops/qrp-shop/Products/Vk2zfadapterBest%C3%BCckt

A K2 IF adapter kit from QRP shop
https://sage-shop.com/epages/qrp-shop.sf/en_GB/

??

73, tom w7sua

On 7/13/2016 5:06 AM, Don Wilhelm wrote:
> Tom,
>
> The answer is "yes" and "maybe".
> The P3 can tune to the K2 IF easily enough (menu setting) - in fact it
> can be tuned to anywhere between 455kHz and 21MHz.
>
> The problem is getting the IF out of the K2.  To accomplish that, a
> buffer amplifier is needed to keep from loading the K2 IF.
>
> Clifton Labs used to have their Z10000-K2 buffer amplifier to do exactly
> that task, but unfortunately Jack Smith is now SK.
> I had obtained information that DX Engineering had taken over the
> Clifton Labs stock, but I don't see anything of it on their website.
>
> If someone would build a buffer amplifier similar to the Z10000, then it
> would be possible.
>
> 73,
> Don W3FPR
>
> On 7/13/2016 3:18 AM, Thomas Taylor wrote:
>> Can the P3 display unit be used with a K2?  If so, are mods necessary for
>> either the K2 or P3?
>>
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to tom at w7sua.org
>
>