[Elecraft] Sound Cards

[Joe Subich, W4TV]

Make sure WriteLog has selected the correct sound card.  If you
connected other hardware to the computer and installed other
software during Field Day you will almost certainly need to reset
all of the audio settings in Windows Control Panel and WriteLog.

73,

    ... Joe, W4TV

On 7/10/2016 7:52 PM, Bill Brooks wrote:
> This may be the wrong place for this question, but...
>
> My K3's, I have two, are connected to my computer sound cards, (I have two)
> via the K3 line out to the sound card line in. After taking the computer
> and the K3's to Field Day and running different software than I normally
> do, they no longer work. When I try to set them up for RTTY (I use
> Writelog), I set the sound card levels. That level setting lasts for about
> 10 seconds and then it goes to zero. Something is changing the setting. It
> happens on both sound cards. Each sound card is connected to a different
> radio.
>
> I am using Windows 7 Home Premium with a microHam u2R.
>
> Anybody have any idea what may be happening?
>
> Thanks,
> Bill, KE5OG
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com
>