[Elecraft] Sound Cards

[Ian - Ham]

Bill,

Make sure WriteLog is using the u2R as the sound card device, and not
whatever the default sound card is for your system. Sometimes, when you make
other changes to your system, it can return all sound card settings to the
default on-board sound card. Over 22 years in IT has taught me to check all
settings, even ones that should be persistent.

73 de,

--Ian
Ian Kahn, KM4IK
Roswell, GA  EM74ua
km4ik.ian at gmail.com
10-10 #74624, North Georgia Chapter #2038
PODXS 070 #1962
K3# 281, P3 #688, KAT500 #860, KPA500 #1468

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Bill
Brooks
Sent: Sunday, July 10, 2016 7:52 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] Sound Cards

This may be the wrong place for this question, but...

My K3's, I have two, are connected to my computer sound cards, (I have two)
via the K3 line out to the sound card line in. After taking the computer and
the K3's to Field Day and running different software than I normally do,
they no longer work. When I try to set them up for RTTY (I use Writelog), I
set the sound card levels. That level setting lasts for about
10 seconds and then it goes to zero. Something is changing the setting. It
happens on both sound cards. Each sound card is connected to a different
radio.

I am using Windows 7 Home Premium with a microHam u2R.

Anybody have any idea what may be happening?

Thanks,
Bill, KE5OG
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to km4ik.ian at gmail.com


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus