[Elecraft] Sound Cards

[Don Wilhelm]

Bill,

The K3 has no control over the computer soundcard levels.
I suggest you pose the question to your computer OS forum to see what 
may be changing your soundcard levels.

The folks at MicroHam *might* be able to offer some clues, but bottom 
line, your OS is doing something unexpected.

73,
Don W3FPR

On 7/10/2016 7:52 PM, Bill Brooks wrote:
> This may be the wrong place for this question, but...
>
> My K3's, I have two, are connected to my computer sound cards, (I have two)
> via the K3 line out to the sound card line in. After taking the computer
> and the K3's to Field Day and running different software than I normally
> do, they no longer work. When I try to set them up for RTTY (I use
> Writelog), I set the sound card levels. That level setting lasts for about
> 10 seconds and then it goes to zero. Something is changing the setting. It
> happens on both sound cards. Each sound card is connected to a different
> radio.
>
> I am using Windows 7 Home Premium with a microHam u2R.
>
>