[Elecraft] KPOD RIT/XIT

[Frank Westphal]

Don,

Turned off VFO OFS, but the XIT/RIT tuning from the K-POD is still erratic.

Thanks for the suggestion.

Frank
K6FW

On 7/10/16 1:23 PM, Don Wilhelm wrote:
> Frank,
>
> I don't have the K-Pod to try it, but there may some strange 
> relationship between your K3 setting of VFO OFS.  Try turning VFO OFS 
> to OFF and see if the K-Pod RIT/XIT selection adjusts RIT properly.
>
> If that fixes it, of course that is likely a bug, but at least you 
> will know what is causing it.
> I have not heard any other reports of abnormal behavior with the K-Pod 
> and RIT/XIT, and I have monitored the K-Pod Field Test comments.
>
> 73,
> Don W3FPR
>
> On 7/10/2016 4:00 PM, Frank Westphal wrote:
>> I have noticed one issue with my K-POD.
>>
>> When I move the rocker switch to RIT/XIT on the K-POD and turn the 
>> RIT/XIT function on from the front panel of my K3 spinning the knob 
>> on the K-POD does not reliability change the value of the RIT/XIT. It 
>> will tune some but not consistently.  Turning the RIT/XIT control 
>> from the front panel of the K3 works normally.
>>
>> VFO A and VFO B respond to turning the knob on the K-POD normally.
>>
>> With the rocker switch in XIT/RIT position on the K-POD and the K3 
>> RIT/XIT function turned off then the K-POD tuning knob adjusts VFO A 
>> in coarse mode.  This is normal for the way I have the K3 programmed.
>>
>> I assume this must be a bug in the 5.50 beta firmware which I have 
>> installed.
>>
>> As a side note installing the surface mount resister in the K3 is not 
>> for those inexperienced in micro soldering.
>>
>> Frank
>> K6FW
>>
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to donwilh at embarqmail.com
>>
>
>