[Elecraft] KX3 memory - odd behavior with RCL

[Thorpe, Jeffrey]

Guess I misunderstood how channel hopping worked, not ever having tried to use it before. Looks like I've been unintentionally using it.
Thanks Don.

Jeff - kg7hdz

> On Jul 9, 2016, at 4:19 AM, Don Wilhelm <donwilh at embarqmail.com> wrote:
> 
> Jeff,
> 
> Do you have an "*" in the text field of those memories?
> If so, that is the indicator that those memories are to be used for channel hopping, and behavior will be exactly as you have described.
> 
> 73,
> Don W3FPR
> 
>> On 7/8/2016 11:03 PM, Thorpe, Jeffrey wrote:
>> Does anyone else notice this:
>> 
>> I hold RCL, dial VFO A to select the memory I want, then tap any key to exit.
>> Everything looks ok, until I try to tune VFO A, but instead of normal tuning, it rotates through the memory channels again, but only within the same band I started out in. (My memories are all in sequential order of frequency, so I don't know if it would 'hop' over any if they weren't sequential.)
>> 
>> VFO A won't go back to normal tuning until I've tapped Band+ or -.
>