[Elecraft] K-Pod not working?

[Joe Subich, W4TV]

 > I'm using it with a K3, S/N 8019 with software version 5.38.

As previously documented, the KPOD requires firmware 5.50 (beta)

73,

    ... Joe, W4TV

On 7/9/2016 9:14 AM, Rick wrote:
> I received my new K-Pod yesterday, and I connected it this morning. But
> the tuning function doesn't work. Can someone suggest what I am doing
> wrong?
>
> I'm using it with a K3, S/N 8019 with software version 5.38. I am
> powering it from the 12V connector on the back of the K3, since I have
> not done the mod to power it from the data cable. The data cable is
> connected too of course. The "on" light turns on as well as the D1-D3
> LEDs as I switch the rocker switch to different positions. But the VFOA,
> VFOB and RIT do not change as I turn the knob on the K-Pod.
>
> I thought there might be a menu entry to enable it, but I don't see
> anything like that. Even though it looks like it's powering on OK, do I
> have to do the mod anyway? Any other suggestions?
>
> 73, Rick K0XB
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com
>