[Elecraft] Now that the K-Pod is shipping, we could use your help with useful macros

[Ron D'Eau Claire]

They're independent Matt. The K-Pod knob works with a rocker switch directly
below the knob to operate VFO A, VFO B or the RIT/XIT offset just as if you
were at the K3 front panel. 

However, to change the RIT/XIT offset at the K-Pod those modes do need to be
initiated either by macros launched from the K-Pod or at the K3 front panel.


73, Ron AC7AC

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Matt
Murphy
Sent: Friday, July 8, 2016 8:50 AM
To: Roger Marrotte
Cc: Elecraft Reflector
Subject: Re: [Elecraft] Now that the K-Pod is shipping, we could use your
help with useful macros

Is there a specification of how the macros work with the knobs? I have not
yet ordered a K-Pod, but would love to write some useful macros (especially
for the knobs). Perhaps I could test the macros using the K3 terminal in the
meantime but it would be great to know how the knobs are configured to
trigger macros first.

Advice appreciated.

73,
Matt NQ6N

On Fri, Jul 8, 2016 at 10:42 AM, Roger Marrotte <marrotte at verizon.net>
wrote:

> Yes it does.  It comes with two 6.8 ohm resistors. One 1/8 watt leaded 
> resistor and one 1/10 watt smd resistor.  I did the mod with the smd 
> resistor.  It's a small resistor about the size of a large fruit fly 
> and it goes kind of in a tight place, especially for a left hander.  I 
> got it in and it works so I'm happy but if I had to do it again I'd 
> probably used the leaded resistor.  I've done some smd work before.
>
> Roger, W1EM
>
> -----Original Message-----
> From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of 
> Terry Schieler
> Sent: Friday, July 08, 2016 10:56 AM
> To: 'Wayne Burdick' <n6kr at elecraft.com>; 'Elecraft Reflector'
> <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] Now that the K-Pod is shipping, we could use 
> your help with useful macros
>
> Looks like my K-Pod should arrive tomorrow.  Does it come with the DC 
> power modification resistors and mod instructions or do I need to order
those?
>
> 73,
>
> Terry, W0FM
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> matt at nq6n.com
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to ron at elecraft.com