[Elecraft] K3 IF setup with SDRPlay and HDSRD

[Joe Subich, W4TV]

As sent to you by "support at microham.com" but apparently blocked by
AOL:

> Follow the HDSDR documentation to set up the "CAT to Radio
> (Omni-Rig)" port.  Connect it to the 2nd CAT port in Router.
> Configure the IF Offsets, etc. in "Options | RF Front-End and
> Calibration.
>
> I have no specific documentation for HDSDR but had not problem
> configuring either my SDR-IQ or SoftRock/sound card using the
> documentation available with HDSDR. See the documentation from the
> developer of HDSDR (such as it is) and contact the SDRPlay support
> team for specifics on their hardware/software.
>
> 73,
>
> ... Joe Subich, W4TV
>     microHAM America, LLC.
>     http://www.microHAM-USA.com
>     http://groups.yahoo.com/group/microHAM
>
>     support at microham.com
>



On 7/8/2016 8:48 AM, Bill OMara via Elecraft wrote:
> I'm trying to set-up a SDRPlay using my K3 IF Out and HDSRD software.  I
> spent six hours yesterday trying to figure out how to make the three of
> these play together.
>
>
>
> Does anyone have any detailed setup instruction for this combination?
>
>
>
> As of yet I'm been unable to get the K3 IF Data feeding into HDSRD.
>
>
>
> Any help would be great.
>
>
>
> Thanks and 73 Bill  W4RM
>
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com
>