[Elecraft] KX3 firmware wish

[Bob Nielsen]

Hopefully any changes along that line will be rolled over into the KX2 
software as well.   My skills with paddles aren't quite good enough to 
be properly decoded for the digital modes (and my coordination is has 
gone downhill from my younger years).

After getting the necessary USB sound card and cables, etc., together to 
work digital modes I was going to try WSJT-X with my KX2 and found that 
it wasn't recognized the radio.  The KX3 selection didn't work, although 
it does appear to with FLRIG.  I guess I will have to wait until the KX2 
is added to hamlib.  I looked at the Programmer's Reference but didn't 
find anything that helped.

Bob, N7XY

On 7/7/16 6:31 PM, Erlend Grimseid wrote:
> Good point.
>
> Maybe the levels also could be stored for data and voice / cw separately.
>
> That would be awesome.
>
> 73
> La4tta Erlend
> 8. jul. 2016 01:25 skrev "Bill Frantz" <frantz at pwpconsult.com>:
>
>> Whenever I switch between SSB and digital, I have to do a complex dance
>> changing levels, the mic bias setting, and pluggin cables. The K3 is so
>> much superior in this area. Anything to improve the situation is desirable.
>>
>> Note that since I haven't yet mastered a paddle, I need a computer to send
>> digital.
>>
>> 73 Bill AE6JV
>>
>> On 7/7/16 at 10:22 AM, egrimseid at gmail.com (Erlend Grimseid) wrote:
>>
>> What firmware are you using Fred? Because on my radio the bias stays on
>>> when i go from voice to data mode. So if i forget to turn out off i have
>>> to
>>> switch to voice and then back to data.
>>>
>>> I  don't use the bias voltage for anything, but someone might have use for
>>> it, that's why i don't recommend disabling it completely.
>>>
>>> Optionally let the settings be stored pr mode.
>>> 7. jul. 2016 17:14 skrev "Fred Moore" <fred at fmeco.com>:
>>>
>>> I actually like it working as it is.  When I go into data mode I don't
>>>> have to turn off the bias etc..  I think that is why it works the way it
>>>> does..  Fred
>>>>
>>>> -------------------------------------------------------------------------
>> Bill Frantz        | When it comes to the world     | Periwinkle
>> (408)356-8506      | around us, is there any choice | 16345 Englewood Ave
>> www.pwpconsult.com | but to explore? - Lisa Randall | Los Gatos, CA 95032
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to egrimseid at gmail.com
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n7xy at n7xy.net
>