[Elecraft] K2, FD, and N1MM

[Kevin]

The DB9 connector on the K2 is NOT a standard RS-232 port.

I believe there is a wiring diagram for the necessary cable in the KIO2 
and KPA100 manuals.

You may have dodged a big bullet.



On 7/7/2016 5:38 PM, PHILIP GRAITCER wrote:
> I got the K2 out for Field Day and it performed great! I’d never used the K2 with a computer, so I hooked it up and set up N1MM for the contest.
>
> I was unable to get the function keys to operate and N1MM was a little unstable, sometimes locking up. I was able to log contacts, but couldn’t send code. This isn’t the case when I use the same setup with my K3.
>
> I’m thinking that there are incompatibilities between the K2 and N1MM, probably due to the age of the K2. But I am not very capable with computers.
>
> Any suggestions?
>
> Phil
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to kstover at ac0h.net


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus