[Elecraft] Elecraft] KX2 Evaluation Up Date

[Richard Ferch]

Jim, not quite. Bob's examples work perfectly with the K3/K3S using CW
keying on DTR (or RTS) of the radio control port, and on any radio
(including the KX2/KX3) if an external keying circuit or Winkeyer is used.
It is only when you don't have a Winkeyer or external serial port keying
circuit to use with a KX3 or KX2 that you need to use the KY command method
(BTW, there is no need to use the CATA1ASC macro instead of CAT1ASC if you
are not using SO2R).

There are several limitations to the KY command method when used with
N1MM+, as described at <
http://n1mmplus.hamdocs.com/tiki-index.php?page=Serial+Parallel+and+Sound+Card+Interfacing&structure=N1MM+Logger+Documentation#Choosing_Your_CW_Method
>.

73,
Rich VE3KI


K9JWV wrote:

Bob - none of your examples will work with an Elecraft KX3 and/or, I believe,
a K3 or KX2.......any macro for my KX3 must look like below (everything
after KY and before ;} is what you can alter, up to 24 characters including
spaces):

F1 CQ, {CATA1ASC KY CQ TEST k9jwv k9jwv test;}