[Elecraft] [K3, k3S] for the Sub Receiver

[Dick Dievendorff]

There are figures on pages 43 thru 45 of the K3S owner's manual (and similar
pictures are in the K3 owner's manual)

There are two relays that route signal to the sub RX. 

One of the options you have is picking the sub receiver's input from the
main rx antenna path. That's the one I use.  Tap ANT while in BSET to choose
main path or AUX RF source.  

Dick, K6KR

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of
lmarion
Sent: Friday, July 1, 2016 16:45
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] [K3, k3S] for the Sub Receiver

I have a different subreceiver question:   The configuration selection is 
bnc or ANTtuner ant 2. Does it require a separate antenna?   I thought the 
subreceiver would use a pickoff of the current antenna or a separate
antenna.

Thanks, confused Leroy AB7CE

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to dick at elecraft.com