[Elecraft] [K3, k3S] Panadapter for the Sub Receiver

[Don Wilhelm]

Bill,

Getting the IF output from the subRX is not a problem, but adding the 
'new protocols' would likely be a problem.

So if you just want to monitor the band around wherever the subRX is 
tuned, that part is easy, just add an IF output to the subRX. I have 
done that to one customer's K3, it is not difficult.

73,
Don W3FPR

On 7/1/2016 1:49 AM, Bill Frantz wrote:
> One of our field day operators announced that while he was making QSOs 
> on active bands, he was going to use the sub receiver in his K3 to 
> scan for 10M CW activity. It occurred to me that this kind of scanning 
> would be a lot easier if you could attach a second P3 to the K3 sub 
> receiver.
>
> It seems simple. You would need an IF out from the sub receiver, and 
> some new protocols on the aux bus. e.g. QSY on the sub P3 QSYs the sub 
> receiver. etc.
>