[Elecraft] Unpacking the K1 package contents

[Ron D'Eau Claire]

Hello Mark: 

The "thermal insulator" is a thin flexible rectangular bit about 1/2" by
3/4" in size that has a hole near one end and is self-stick, so it is
supplied on a bit of backing paper you peel it off of when you install it on
the power transistor. It may be in one of the little brown envelopes. There
is a photograph of it still mounted on its backing paper in the parts list. 

The Acrylic Bezel is the plastic cover over the LCD on the front panel. Look
at the drawing of the K1 on the front cover of your manual and you'll see a
rectangle depicting the cover with a screw at each corner covering the LCD
itself and the words "Elecraft" and "K1 Transceiver". It should be in one of
the brown envelopes in the kit. 

73, Ron AC7AC

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Mark
Petrovic
Sent: Saturday, January 30, 2016 3:50 PM
To: elecraft at qth.net
Subject: [Elecraft] Unpacking the K1 package contents

Hi.

Would  someone please post pictures  of  the items

E700002 - Thermal insulator

and


E100108  - Acylic  bezel

I am  having  trouble locating and identifying  them  as  I unpack  my  new
K1  kit  contents.

Thanks.

--
Mark
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to ron at elecraft.com