[Elecraft] Need a second set of eyes... WAS: Re: Price Increase Alert for Feb 4th.

[Igor Sokolov]

Clay,
I would give up so many filter leaving only both stock SSB in both RX and 
adding 400Hz CW for the main RX.
If you are into contesting or DXing I would rather swap hand mike for Heil 
IC headset.
If you are into Digi I would order KTCXO3
All the rest can be added later.

73, Igor UA9CDC
----- Original Message ----- 
From: "Clay Autery" <cautery at montac.com>
To: <elecraft at mailman.qth.net>
Sent: Friday, January 29, 2016 12:04 AM
Subject: [Elecraft] Need a second set of eyes... WAS: Re: Price Increase 
Alert for Feb 4th.


> OK...  so I don't have time to complete my stack of cash for my K-Line
> order...  I've paired it back.  Anyone interested in offering me a
> second pair of eyes to see if I am making any glaring mistakes in
> spec'ing out my reduced order?
>
> Here's a link to a screen shot of my shopping cart:
>
> *http://www.montac.com/pics/Elecraft_Draft_Order.jpg
> *
> Here's the Executive summary:
> K3S/100K  Transceiver with 100 Watt amp module
> KRX3A-K  Secondary Receiver
> KAT3A-K  Internal Antenna tuner
> MH-2  Hand Mic
> SS30DV  Power Supply
>
> And here's the filters I am going to end up with:
> FL1 - Reserved for FM/Reserved for FM
> FL2 - KFL3A-6K/KFL3A-6K  (AM/eSSB)
> FL3 - KFL3A-2.8_2.7sw/KFL3A-2.8_2.7sw  (trade-up to 2.8kHz/8-pole on
> both receivers)
> FL4 - KFL3A-400/KFL3A-400  (CW... yes, this "no-code" is diligently
> working to achieve 25wpm before the end of summer)
> FL5 - KFL3A-250/KFL3A-250 (CW)
>
> Lot's of other stuff I'd LIKE to have, but just can't do it.  Anyone
> think I should do anything different?  I'm kind of capped right around
> this total.
>
> Thanks
>
> ______________________
> Clay Autery
> MONTAC Enterprises
> (318) 518-1389
>
> On 1/27/2016 5:02 PM, Eric Swartz - WA6HHQ, Elecraft wrote:
>> Early alert for our Elecraft list readers:
>>
>> We're finally implementing the planned price changes that we first
>> mentioned late last year. We ended up delaying that change due to both
>> the large holiday season order rush and several ham shows, both of
>> which always generate a lot of sales sales activity and keep our sales
>> team very busy.
>>
>> As noted before, our costs are going up as our vendors increase their
>> prices to us and our labor costs also increase. (Its a never ending
>> battle to keep costs down as economic activity has picked up the last
>> two years.) We've been absorbing all of these increases, but now we
>> have hit the point where we  must increase prices slightly on a number
>> of our products.
>>
>> The prices will change on next Thursday, Feb. 4th.  Our on-line order
>> forms will update with the new pricing at that time.
>>
>> Please resist the urge to call or email our sales / support people
>> about which specific products will be changing or how much the changes
>> will be, as they do not have this information. (We're still in the
>> middle getting everything entered.)
>>
>> Of course, all orders received -prior- to the Feb 4th increase will be
>> charged at the lower pre-increase pricing when they ship.
>>
>> 73,
>> Eric
>> /elecraft.com/
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to ua9cdc at gmail.com