[Elecraft] K2 very low audio

[Don Wilhelm]

Ed,

That would be controlled by the SSBA menu parameter.

73,
Don W3FPR

On 1/27/2016 11:33 PM, Edward Finn wrote:
> Hello,
> After years of operation I decided to add a serial port to my low power k2.
> I use it with the kv60 as an if for vhf/uhf transvertors.
>
> So I have been doing a lot of menu stuff and may have corrupted something.
> I have full output in tune out cw, but almost no output now in ssb. There
> is a small amount of output of I yell in the mike or transmit through my
> sound card.
>
> The radio was working fine Monday night...
>
> I see something curious that could be the culprit. I may have corrupted a
> menu setting.
> On the ssb adapter board, at the audio input there is a signature called
> /atten coming from the pic. It is active low.
>
> Can anyone tell me what menu option changes this pin?
>
>