[Elecraft] K3S DIGOUT1 question

[RIchard Williams]

You are correct in saying you can assert Digout1 on 160M.  That said, I am not sure what you are trying to accomplish by tying it to enabling the RX antenna?  You can accomplish the same thing by having 160M selected as the band, and then tapping the RX ANT button.   That selection is remembered by the K3 (or K3S), and every time you select 160M, the radio will automatically select the RX ANT (which is exactly what I do here).
FYI, you can do the same thing for the 6, 10, and 12M preamp;  select each band, turn on the preamp (flashing PRE on the display), and from then on, when you select those bands, the pre amp will turn on automatically,
Dick, K8ZTT
 

      From: Jim Miller <jim at jtmiller.com>
 To: Elecraft Reflector <elecraft at mailman.qth.net> 
 Sent: Tuesday, January 26, 2016 5:22 PM
 Subject: [Elecraft] K3S DIGOUT1 question
   
According to the K3S user manual DIGOUT1 is per band and per antenna.

Does this mean that I could assert DIGOUT1 on the basis of 160m and the
activation of the RX antenna?

73
jim ab3cv
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to richarddw1945 at yahoo.com