[Elecraft] K3S and WSJT-X

[Joe Subich, W4TV]

On 1/25/2016 10:33 PM, Robert Nobis wrote:
 > My issue, is that the PWR slider on WSJT-X is extremely sensitive,

That's why I leave it at 100%, turn down the "Device" level in Windows
Volume Mixer and adjust the K3/K3S Line In (Mic Gain) for the correct
four bar ALC level.  The K3/K3S Line In level runs between 15 and 25
for four bars depending on the level of the sound card device (master)
level and is easy to adjust.

73,

   ... Joe, W4TV


On 1/25/2016 10:33 PM, Robert Nobis wrote:
> Bob,
>
> Yes, I also use the PWR slider bar to adjust the number of bars on the ALC indication, after I have adjusted the Line Gain on the K3.   And, yes, the actual transmit power output form the K3 is adjusted by the Power Level nob on the front panel of the K3.
>
> My issue, is that the PWR slider on WSJT-X is extremely sensitive, but I have been living with this.
>
> 73,
>
>
> Bob Nobis - N7RJN
> n7rjn at nobis.net
>
>