[Elecraft] RXEQ for KX3

[Gary K9GS]

Hi Jim,

I've always wondered why, for CW, with the K3 you would not want to set 
the RX EQ to peak at the CW PITCH setting?



On 1/24/2016 1:40 PM, Jim Brown wrote:
> I generally set RXEQ flat (no boost or cut) for general operation on 
> mains power in both K3 and KX3.
>
> BUT -- if you're going backpacking, you'll reduce battery drain a bit 
> and increase audio headroom by setting the four lowest frequency bands 
> for maximum cut. This does the same thing on RX that it does on TX -- 
> it gets rid of low frequency components of voice that make no 
> contribution to intelligibility but burn power.
>
> 73, Jim K9YC
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to garyk9gs at wi.rr.com
>
>
> -- 
> 73,
>
> Gary K9GS
>
> Greater Milwaukee DX Association: http://www.gmdxa.org
> Society of Midwest Contesters: http://www.w9smc.com
> CW Ops #1032   http://www.cwops.org
>
> ************************************************