[Elecraft] KX3 Feature Request

[Don Wilhelm]

Myron,

It will already do that.  You apparently have the VFO OFS menu parameter 
set to OFS - change it to OFF and you will have your wish.
Note that if you have VFO OFS parameter to OFS, the step size will vary 
by the value set in VFO CRS.  The size setting is per mode.
See those menu items in the manual.

73,
Don W3FPR

On 1/22/2016 9:54 AM, Myron Schaffer wrote:
> I know this may be a nit but it would be neat if the VFO B knob would increment without rounding off the frequency. For instance, I participate in the foxhunts and find the fox. Then I use the DW SUB function and dial in the fox with the VFO A knob. If I use the VFO B knob it rounds off the decimal place and overshoots the target freq. If it were set to just increment of 1.0 I would land exactly where I want but it rounds off the freq and throws me out into left field.
>
> Thanks.
> Myron WV🌀H
> Printed on Recycled Data
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w3fpr at embarqmail.com