[Elecraft] [KX3][XPA100] KX3 drops out of PA MODE ON

["Hjalmar Duklæt"]

Hi Glen.
I've had this probleme several times and what I have to do (or at least do) is to disconnect the radio from the PC. After that it normally works. Maybe you have to switch the radio off/on. When everything works again, you can connect to the PC.
73 de Hal/la4xx

On 16-01-21 08:51, Glen Torr  <glen.torr at gmail.com> wrote:
> 
> Hi list participants,
> I have a KX3 and a KXPA100 that till now have worked fine. Last night I
> turned on the combo and set "PA MODE" to ON. The amp came on, it displayed
> in sequence the ON, ANT1, MAN which went out to be replaced by AUTO.
> About 7 seconds later the KX3 returned to "PA MODE OFF" and the amplifier
> turned off.
> The KX3 reset its output power to 5 W.
> I have downloaded latest beta firmware for both but the problem remains.
> There is an uncharged set of eneloop AA NiMh in the KX3.
> I feel I have made a dumb mistake somewhere!
> Any ideas?
> I have searched to no avail.
> Cheers,
> Glen VK1FB
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net <Elecraft at mailman.qth.net>
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to duklaet at broadpark.no
>