[Elecraft] Lost Receive on All Bands

[Hajo Dezelski]

Hi,

just try to connect the K3 directly to your antenna.
73 de Hajo DL1SDZ

Gruss
Hajo

---
Cela est bien dit, mais il faut cultiver notre jardin.

On Tue, Jan 19, 2016 at 1:26 PM, Richard Thorne <rthorne at rthorne.net> wrote:

> I have a K3 (1 of 2) that suddenly has lost all receive.  I've checked the
> obvious things.
>
>     - I'm not using the rx antenna
>     - I have antenna 1 selected and the coax is attached to it
>     - Diversity receive is turned off
>
> I have disconnected all connections on the back of the rig.  All I have
> connected is the power supply and a length of coax connected directly to an
> antenna (bypassing all antenna switches).
>
> The rig appears to be transmitting just fine.  If I press the xmit button
> for a second I get the expected 20 watts out and the swr is 1.0:1
>
> I have two K3's in the setup.  Both are connected to a Microham MK2R+
> which prevents both rigs from transmitting on the same frequency. I also
> have a full set of 4O3A high power band filters in place to protect each
> rig.
>
> Any other suggestions?  I plan on calling Elecraft later this morning as
> well.
>
> Thanks
>
> Rich - N5ZC
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dl1sdz at gmail.com
>