[Elecraft] Low power KX1

[Johnny Siu]

Hello Richard,
Please have a look of my review :

 http://www.eham.net/reviews/detail/3586
There are some construction hints.
73
Johnny VR2XMC

      寄件人︰ Richard <ccflxtc at gmail.com>
 收件人︰ Elecraft at mailman.qth.net 
 傳送日期︰ 2016年01月17日 (週日) 9:53 AM
 主題︰ [Elecraft] Low power KX1
   
From: Richard [mailto:richard at inparadise.us] 
Sent: Saturday, January 16, 2016 8:50 PM
To: Elecraft at mailman.qth.net'
Subject: Low power KX1


I am very new to the world of CW.  Several months ago I built a KX1.  Once I
was able to receive with it, I built the 30-80 band set, and once it was
installed and working, I built the ATU.  With the ATU was the first time I
was able to measure power.  I am only getting .4W out of internal, and 1W
with a 13 volt power supply.  So I did the power modification changing the
resistors, and now I get .6 internal and 2W with 13V.
 
I could sure use some advice.  I do not have a bridge or watt meter.  I do
have a good scope  Can I measure the signal voltage across 50 ohms?
 
Thank you in advance.
 
          Richard
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to vr2xmc at yahoo.com.hk