[Elecraft] K3 SN89XX Audio Problem Help please (FIXED)

[Bill OMara]

Thanks for all the Help!!


Below E-mail from Elecraft Customer Support fixed the problem.



From: Craig K3 Support [mailto:k3support at elecraft.com] 
Sent: Friday, January 15, 2016 3:24 PM
To: Bill OMara <w4rm at aol.com>
Subject: W4RM : K3 Speaker Setting

Hi Bill,

While in SPKR+PH in the Config Menu, please tap the A/B 1 button until you
see PH.R SW +. That should fix it.

73,

--
--------------------------
Craig Smith W6WL
Elecraft Customer Support
831-763-4211 x 174
--------------------------


-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Bill
OMara via Elecraft
Sent: Friday, January 15, 2016 2:47 PM
To: Elecraft at mailman.qth.net
Subject: [Elecraft] K3 SN89XX Audio Problem Help please

I have a new to me, Used K3 that looks to have a setting or audio problem I
can't figure out.

 

The problem I'm having is the CONFIG setting for "SPKR+PH" is set for Yes
and the audio is working the way I understand it to work (Both Speaker and
headphone audio at the same time).

 

But when I change "SPKR+PH" to NO I only get Audio if the Headphones are
plugged in, when I unplug the headsets NO audio comes out vis the internal
speaker and the radio audio is gone.  If I then go to the CONFIG settings
for for "SPKR+PH" and change it back to "yes" then the internal speaker then
provides audio again.

 

What am I missing?

 

No second receiver is installed if this has any impact.

 

I own two other K3 radios and they do not act in this manner.

 

 

Thanks for any help

 

73 Bill  W4RM

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to w4rm at aol.com