[Elecraft] K3 SN89XX Audio Problem Help please

[Don Wilhelm]

Bill,

Check the SPKR setting in config menu.  Set it to 1 if using only the 
internal speaker.  If using a pair of speakers plugged into the rear 
speaker jack, set it for 2.

73,
Don W3FPR

On 1/15/2016 2:46 PM, Bill OMara via Elecraft wrote:
> I have a new to me, Used K3 that looks to have a setting or audio problem I
> can't figure out.
>
>   
>
> The problem I'm having is the CONFIG setting for "SPKR+PH" is set for Yes
> and the audio is working the way I understand it to work (Both Speaker and
> headphone audio at the same time).
>
>   
>
> But when I change "SPKR+PH" to NO I only get Audio if the Headphones are
> plugged in, when I unplug the headsets NO audio comes out vis the internal
> speaker and the radio audio is gone.  If I then go to the CONFIG settings
> for for "SPKR+PH" and change it back to "yes" then the internal speaker then
> provides audio again.
>