[Elecraft] Remote a KAT500

[Michael Blake]

Thanks Knut.  The cable is actually Belden 9913F which is filled much the same as LMR-400 but has a stranded center conductor.  I will search for your articles with earnest,  It appears from the photos that you only have the PC port connected which should be easy to accomplish.

Michael Blake
k9jri at mac.com



> On Jan 13, 2016, at 4:04 PM, ab2tc <ab2tc at arrl.net> wrote:
> 
> Hello again,
> 
> BTW don't use 9913 cable. It is susceptible to water ingression causing
> higher loss. All the coax at my site is from Times Microwave. The
> substitution for 9913 would be LMR400. There are several variations of this
> cable depending on use.
> 
> AB2TC - Knut 
> 
> 
> Hi Michael.
> 
> You bet. See ab2tc.com for a couple of pictures of my installation. I
> apologize for the immaturity of the web "site". Also search this reflector
> for my call sign AB2TC and you will find valuable information on how I have
> it set up. My setup is not the only option; others have successfully used
> internet CAT6 cable to connect both serial connection and  the AUX channel.
> 
> AB2TC - Knut
> 
> 
> 
> Michael Blake wrote
>> Has anyone remotely  mounted an Elecraft KAT500 in a weatherproof
>> enclosure?
> 
> 
> 
> 
> 
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/Remote-a-KAT500-tp7612584p7612593.html <http://elecraft.365791.n2.nabble.com/Remote-a-KAT500-tp7612584p7612593.html>
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k9jri at mac.com