[Elecraft] Remote a KAT500

[ab2tc]

Hi Michael.

You bet. See ab2tc.com for a couple of pictures of my installation. I
apologize for the immaturity of the web "site". Also search this reflector
for my call sign AB2TC and you will find valuable information on how I have
it set up. My setup is not the only option; others have successfully used
internet CAT6 cable to connect both serial connection and  the AUX channel.

AB2TC - Knut



Michael Blake wrote
> Has anyone remotely  mounted an Elecraft KAT500 in a weatherproof
> enclosure?
> 
> My current antenna situation is an MFJ-994BRT fed with 100 feet of 9914F
> and then either a 30’ length of 9913F or 450 ohm ladder line to any
> variety of 60 foot dipole antennas.  I would like to replace the tuner
> with a KAT500 but unsure of control circuits other than 12vdc power which
> would be provided over the 9913F coax feed line.
> 
> The radio is a KX3 driving a modified ALS-600 with 500 - 600 watts to the
> feed line.
> 
> Michael Blake - K9JRI





--
View this message in context: http://elecraft.365791.n2.nabble.com/Remote-a-KAT500-tp7612584p7612590.html
Sent from the Elecraft mailing list archive at Nabble.com.