[Elecraft] K1 no audio

[kg9hfrank at gmail.com]

John, great to hear.
Most of us have graduated to a 6” loop that is lighted.
Frank KG9H

> On Jan 11, 2016, at 10:48 AM, wingman67 via Elecraft <elecraft at mailman.qth.net> wrote:
> 
> Problem solved, thanks for the pointers Don!  In checking the RF board and
> filter board over and over, I disassembled the front-panel board again,
> resoldered pin 10 on J1 since it didn't look as good to me as it could have
> been and then, as I went over everything I found an unsoldered leg on R11. 
> I am normally extremely meticulous when it comes to building but this one
> got past me!  Soldered that leg, re-assembled the FP assembly and hooked it
> back up to the K1's RF and all is well.  VFO works and all tests pass.
> 
> So now I'm ready to start working on the TX section of the board.
> 
> Thanks again Don.
> 
> 
> 
> -----
> John Hines
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/K1-no-audio-tp7612521p7612533.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to kg9hfrank at gmail.com