[Elecraft] (K3) Low output power on 15 meters (new KYSN related ?)

[Ken K3IU]

I have the same thing here, Bruce. Something in firmware was 
changed a while ago and when I reported it to Wayne, he said 
that it is within specs.
73, Ken K3IU
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
On 1/9/2016 11:09 AM, Bruce Meier wrote:
> Today I noticed that the output power on 15 meters does not reach 100w.  The
> max, according to the front panel meter reading, is 93w.  So, I ran the
> transmitter gain calibration and it did not help. I decreased the power to
> 90w and it reached 90w, so I gradually increased the power and it is fine up
> to 93w.  When set to 94w and above the max output is 93w.  I checked all
> other bands and with the exception of 17 meters they are fine. The same low
> power output occurs on 17 meters.
>
> I then tried my other K3 going through the exact same testing order and
> received the exact same results. They are both the exact same configuration.
>
> Specifics:
>
> - testing into both a dummy load (2 different ones) and 3 different 15 meter
> antennas
> - both K3 rigs are running latest firmware (5.38 / 2.86 / 2.86 / 1.25)
> - The power supply voltage at the rigs is 13.8 and drops to around 13.0 when
> in transmit
> - Reran the Transmitter Gain Calib - no help.
>
> NOTE: The new KSYN3As were just installed in both rigs including the second
> RX (2 weeks ago)
>
> Suggestions?
>
> 73,
> Bruce-N1LN
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to kenk3iu at cox.net
>