[Elecraft] KY Command

[Richard Ferch]

On January 7, NR4C posted a function key message file for N1MM+ that 
used KY commands to send FSK RTTY without requiring any FSK keying 
interface connected to the K3/K3S AUX port. While the basic idea (<04> 
used to terminate transmissions) is good, unfortunately there is an 
error in this file.

Almost every message line in the file was terminated with a K30; 
command. These K30; commands should all be removed from the file. N1MM+ 
expects the K3/K3S to be in K31 mode, and switching it to K30 mode will 
cause some N1MM+ program features to stop working correctly.

73,
Rich VE3KI