[Elecraft] KY Command

[Rich]

Thanks so much.  It worked like a champ.  I guess I should not have 
"assumed" that the Prog Ref I googled was the most recent.  The one on 
your site shows the KYW quite clearly.

My bad.

Thank you
Rich
On 1/6/2016 23:57 PM, Wayne Burdick wrote:
> Use the "KYW" form of the command. Inserting a 'W' in place of the normal space causes any subsequent command (in this case "RX;") to wait for the text string to be sent.
>
> 73,
> Wayne
> N6KR
>
> On Jan 6, 2016, at 8:55 PM, Rich <rwnewbould at comcast.net> wrote:
>
>> I am trying to use the KY command with Writelog for RTTY contesting.  I have no problem setting up a Keyboard shortcut which then sends the data in the KY command, however I cannot find a way to stop the K3 from transmitting after the command sends the data in KY.  I see there is an RX; command to end the TX.  I also tried a SWT16 to create a press of the XMIT button.  I cannot find a syntax that works for combining the RX or SWT16 command at the end of my KY command.  I do not want to use another key press.  I was hoping to do it with one line of data.
>>
>> The command string does not appear to work with the KY command
>>
>> Neither of these formats with return to radio to RX.
>>
>> KY "callsign";RX;
>> or
>> KY "callsign;SWT16;
>>
>> Any thoughts?
>>
>> Rich
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to n6kr at elecraft.com
>